Librairie technique Megger

Télécharger la Brochure de Test des Relais de Protection

Here you will find Firmware to be loaded into the MPQ1000 and MPQ2000 Analysers. The current update file MPQ_Firmware_1295_OLD_OS.zip contains the update, specific instructions for the MPQ1000 and specific instructions for the MPQ2000. Download the zip file and directly unzip it to a Clean Thumb drive. The update is less than 10 MB.

This is an easy solution to measure the impedance values for cables, the values are used for calculation of compensation factor in distance protection.The compensation factor is first theoretically calculated and these values can now be compared with the measured values.

The test and maintenance of electrical components on rolling stock is not an easy job to do. Some maintainers dismount some of the parts and bring them to a central location for revision and maintenance. This is a cumbersome and time consuming exercise. In many cases, the electrical parts are replaced only when they break down and are not subject to periodical testing. This of course holds a risk as some parts, e.g. circuit breakers, are crucial for safety reasons.

The brochure for the SVERKER900 relay and multifunctional substation test system

Software download files for TraceXpert

Software download files for PowerSuite Professional

PD Scan - Reporting Software and Firmware

The MPQ software can be configured to automatically sync the remote MPQ to the network time periodically. This saves the expense of a GPS and removes the possibility of losing the GPS signal.

The MPQ can be controlled remotely using the Metrosoft PQ PC software. This app note shows how to do this.