E-Tray Software
ETRAY SOFTWARE UPDATE NOTICE
APPLIES TO: T3090, EZ-RESTORE, EZ-THUMP AND SMART-THUMP
SOFTWARE UPDATE WARNING:
Prior to updating the affected products to software version 2.5.2/0.43 or later, you must first consult the factory via the contact information provided below to determine if your instrument hardware can support the upgrade. Failure to consult the factory prior to performing software upgrades could leave your instrument in a state that will require it to be sent in for repair.
Please have the following information ready before you call:
- Instrument model and serial number
- ETray Hardware revision which is determined by using the 'ETray revision software' located below.
Contact Us
Customer Service: 1-800-723-2861
ETray Demo for PC (Windows 7 64-bit)
ETrayDemo-v3-0-12-27Jul2023.zip
10,3 MB | 12/09/23
E-Tray Revision Software to determine controller version
ETrayPCRev-V1-0-0-0.zip
11,9 KB | 16/09/22
ETray Software
This is the software for use in the following products:
·EZ-Thump
·EZ-Restore Overdrive
·M-Thump
·Smart-Thump
·T3090
EtrayUpdate-3-0-12-FW-1-17.zip
1,5 MB | 12/09/23