This product series is now obsolete and has been replaced by the TTRU3
La gamme de ratiomètres triphasés TTR300 a été conçue pour mesurer les rapports de spires des transformateurs de puissance, de mesure et de distribution des postes électriques ou des sites de production. Une conception robuste permet d'utiliser ces instruments simplement même en milieu difficile. Nos cordons sont spécialement conçus pour être flexibles lorsqu’ils sont utilisés sous des basses températures.
Cette gamme est idéale pour les fabricants de transformateur de puissance. Leur procédure unique de tests et leur capacité de mémorisation permettent à l’opérateur d’installer et de réaliser simplement des tests compliqués avec un ratiomètre triphasé (avec un régleur comportant plusieurs prises et les TC type Bushing) en très peu de temps. Ce test inclut également un diagnostic Bon/Mauvais pour chaque mesure.
La gamme TTR300 mesure également le déphasage des enroulements primaires par rapport à ceux du secondaire. Cela permet d’identifier rapidement des problèmes dans le transformateur comme des spires en court-circuit ou des défauts avec le circuit magnétique. Cette mesure est utile lors de la vérification du déphasage de tous types de TP et TC.
Chaque instrument est équipé d’une télécommande pour réaliser des tests autonomes. Cela permet à l’opérateur de tester très rapidement les transformateurs comportant un régleur.
The following components have been updated:
PowerDB ________________ V11.2.10
MTOTestXP ______________ 2019.12.03.1
Delta Manual Control ______________ 2.0.9.51.0
Instrument Config ______ 1.0.20023.1919
Splash Screen __________ 1.0.21075.830
Factory Config _________ 1.0.21122.850
Megger Update Manager __ 1.0.21165.1032
Recommendations
- Megger recommends that you return your instrument annually for calibration verification. - Any instrument returned for re-calibration will be updated with the latest firmware and software versions. - Certified Factory Calibration is valid for one year.
Attention
Incorrect installation of updates or incomplete updates may cause the equipment to become unusable.
If damage occurs from improper updates, the customer may be responsible for repair costs.
Download this zip file, extract, and run the executable.
256bit Hash: be0628b2014fffeca839036dae42c3d1a6c5c73d79a2e5f2fc6d0716667ef9d3
XfmrFamUpdater_10.005_fi3.zip
763 MB | 02/08/2022
Please download and read these instructions before performing the update.
Firmware version 6.5 is available via Megger’s repair department as part of a hardware update and will not appear on this website. Both Firmware versions 6.4 & 6.5 improve reliability, but 6.5 improves reliability drastically and completes tests in half the time.
The hardware update related to Firmware version 6.5 will be performed FREE OF CHARGE (this does not include cost of shipping to and from Megger factory or Megger Authorized Service Center [ASC]). Please note: Any required hardware repairs not related to Firmware version 6.5 will incur standard repair charges. Please contact your nearest Megger sales representative for information on where to return your instrument for updates.
The Megger Valley Forge, USA factory and select Megger ASCs can perform updates. If you do not feel capable of performing updates properly, please contact your nearest Megger sales representative for information on where to return your instrument for updates.
Carefully read all instructions and backup your data before performing any updates. Only update the firmware or software if you are experiencing difficulty with your instrument or if you have a specific need to do so.
Incorrect installation of updates and incomplete updates may cause an error and make the equipment unusable.
If damage occurs from improper updates, customer is responsible for repair costs.
1. PowerDB PC Upgrade [Optional]:
a. Download PowerDB 11 (You will be redirected to www.powerdb.com/download)
b. TTR PC Quick Manual
2. Install TTR 300 Firmware Upgrade:
a. TTR 300 Firmware Upgrade Instructions
b. Download TTR 300 Firmware Upgrade Installer - Firmware version 6.4
- Megger recommends that you return your Three-Phase TTR annually for calibration verification. - Any instrument returned for re-calibration will be updated with the latest firmware version. - Certified Factory Calibration is valid for one year.
2. Install TTR 310 Color LCD Firmware, Application, and Statup Upgrade:
Please refer to the version information on your TTR 310 Color LCD About/Update screen to determine if this update applies to you
a. TTR 310 Color LCD Firmware, Application, and Statup Upgrade Instructions
b. Download TTR 310 Color LCD Firmware, Application, and Startup Upgrade Installer
i. Application Version: 1.0.0.84 ii. Firmware Version: 6.4 iii. TX25Startup Version: 1.0.1.22
c. TTR 310 Quick Manual
2. Install TTR 310 Black & White LCD Firmware Upgrade:
Please refer to the version on your TTR 310 Black & White LCD Self-Test screen during startup to determine if this update applies to you
a. TTR 310 Black & White LCD Firmware Upgrade Instructions
b. Download TTR 310 Black & White LCD Firmware Upgrade Installer - Firmware version 6.4
3. TTR 310 Black & White LCD Fix [May not be necessary]:
If you experience issues with your screen after upgrading your TTR 310 to the latest firmware, use the Revert/Update functions of this program to fix the problem
a. Download TTR 310 Black & White LCD Fix
TTR320 Combined Firmware and PowerDB Onboard Updates and Firmware only Updates In view of the complexity of these devices, it is essential to carefully read and fully understand all instructions before starting the update. A PC (personal Computer) to download with and a blank USB Thumb Drive is required. (A minimum size of 2GB with no files present is recommended.)
!! WARNING !!
Incorrect installation of updates and incomplete updates may cause a malfunction of the equipment and make it unusable. If this were to happen, the equipment should be returned to Megger or an authorized service center. Only update the firmware or software if you are experiencing difficulty with your instrument or if you have a specific need to do so. All stored readings should be saved to PowerDB or PowerDB Lite on a PC (personal computer) before updating the instrument. If you need assistance please submit a software support ticket here.
FYI (For your information)
PC Support Software To update or acquire PowerDB or PowerDB Lite Software, please follow this link: "PowerDB") PowerDB Lite is free software used to extract stored results from the instrument. PowerDB Package Version Information:
Please download and read "TTR3xx Update Instructions 1.6" before beginning the actual update. Update Package Versions:
Notes: MD5 validation files are now being made available for those that wish to verify that their download is still intact before unzipping and executing the software. To download the MD5 text files please right click and select save as, otherwise the text file will be displayed in a new tab or window. The same is true for any PDF files.
1. TTR 330 Quick Manual:
a. TTR 330 Quick Manual
2. Install TTR 330 Firmware Upgrade:
Please refer to the version of firmware on your TTR 330 to determine if this update applies to you. This can be accessed by going to Home -> Settings within PowerDB
a. TTR 330 Firmware Upgrade Instructions
b. Download TTR 330 Firmware Upgrade Installer - Firmware version 6.4
3. Download Brother PocketJet 6 Installer [Accessories]:
a. TTR 330 Brother PocketJet 6 Install Instructions
b. Download TTR 330 Brother PocketJet 6 Installer